High-Performance Variable Frequency Air Compressor for Efficient Use

• Customization: Available
• After-sales Service: 7*24
• Warranty: 1 Year
• Model NO.: G2
• Lubrication Style: Lubricated
• Cooling System: Air Cooling
• Power Source: AC Power
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Flow Rate: 5.8-61m3/Min
• Pressure: 8/10bar
• Starting Mode: Variable Frequency
• Specification: 37-315kw
• Trademark: Leadcom
• Origin: China
• HS Code: 8414809090
• Production Capacity: 20, 000 Pieces/Year
• Package Size: 2090.00cm * 1240.00cm * 1560.00cm
• Package Gross Weight: 1050.000kg

Product Description

Product Presentation

G2 Series Parameter Table
Model	Rate Power(kW)	Pressure(MPa)	F.A.D(m3/min)	Size(LxWxH)	Connection(Inch)	Weight(Kg)
G2-37PL	37	0.8	6.8	1950X1100X1390mm	Rp1-1/2''	950
G2-45PL	45	0.8	8.2	1950X1100X1390mm	Rp1-1/2''	980
G2-55PL	55	0.8	11.6	2590X1500X1640mm	DN50	1890
G2-75PL	75	0.8	15.6	2590X1500X1640mm	DN50	1960
G2-90PL	90	0.8	18.5	2990X1700X1963mm	DN65	2200
G2-110PL	110	0.8	21.0	2990X1700X1963mm	DN65	2360
G2-132PL	132	0.8	24.7	2990X1700X1963mm	DN65	2445
G2-160PL	160	0.8	31	3450X1880X2120mm	DN80	4000
G2-185PL	185	0.8	35.5	3450X1880X2120mm	DN80	4050
G2-200PL	200	0.8	40.0	3280X1980X2210mm	DN125	5600
G2-220PL	220	0.8	45.0	3280X1980X2210mm	DN125	5700
G2-250PL	250	0.8	50.0	3280X1980X2210mm	DN125	6000
G2-315PL	315	0.8	61.0	4300X2300X2380mm	DN125	7200

Dynamic Comparison: Permanent Magnet Motor vs. Ordinary Asynchronous Motor

Permanent magnet motors distinguish themselves with outstanding advantages over electrically excited motors:
High Efficiency
Experience unrivaled efficiency by eliminating excitation system losses, elevating efficiency by an impressive 5-12%. Enjoy a high power factor and an exceptional torque inertia ratio, complemented by reduced stator current and resistance losses. Our rotor parameters are precisely measurable, ensuring superior control performance. Benefit from the direct drive of the motor with no speed slip, bearings, or connecting transmission, resulting in an efficiency gain exceeding 3%. Under lighter loads, observe a remarkable efficiency increase of 15-35% compared to asynchronous motors, sustaining optimal efficiency under any load condition. Currently, the energy efficiency of permanent magnet motors used by Hylein meets the prestigious national level 1 energy efficiency standards.
Low Noise
With an expertly engineered magnetic field design and precise magnetic density distribution, this motor features a broader operating frequency range and significantly diminished operational noise. Enjoy an extraordinarily stable air pressure with open loop vector control, boasting a response time under 50ms, enabling immediate gas production adjustments across a vast range.
Compact Structure, Small Size, Light Weight, High Precision and Fast Response
Liberated from the constraints of traditional exciting windings and power supplies, our design ensures a simplified structure, enhanced reliability, and effortless maintenance.
High Starting Torque
The starting torque and overload capabilities of permanent magnet synchronous motors are vastly superior, achieving power levels that surpass three-phase asynchronous motors. Experience a maximum starting torque to rated torque ratio exceeding 3 times, a stark improvement compared to the typical 1.6 times seen in conventional asynchronous motors.

Advanced Two-stage Compression

Energy Efficiency That Translates to Significant Savings

Traditionally, companies consider a 20% air compressor displacement reserve when selecting compressor types, taking pressure loss and common selection methods into account. However, this can be optimized for better efficiency.
Air consumption varies significantly across different time periods yearly, monthly, and daily, resulting in most air compressors operating at only 50-70% of their rated air displacement, leading to avoidable electricity costs.
While reducing material costs presents challenges in the current climate, shifting focus to minimizing electricity expenses can substantially reduce overall product costs. Remember, reducing electricity usage directly translates to cost cutting, thus enhancing your product's competitiveness in the market!
Conclusion: Permanent magnet frequency conversion air compressors offer: lower energy consumption and significant energy savings!

Air-end Operates with Near Silence

 

 

Company Profile

Leadcom is a beacon of excellence and innovation in the realm of manufacturing, especially known for its expertise in air compressors and vacuum pumps. Originating from the esteemed legacy of Linghein, Leadcom has been invigorated by its acquisition by the industry titan, Atlas Copco. This strategic merger has injected new vitality into Leadcom, allowing it to leverage an immense wealth of industry knowledge and experience. As a result, Leadcom consistently stands out as an influential and leading force in its field.

Boasting an illustrious 25-year legacy of manufacturing excellence, Leadcom showcases unparalleled R&D capabilities and production prowess that set the benchmark in the industry. Its commitment to quality and innovation remains unmatched, ensuring its place at the forefront of technological advancement.
Driven by an innovative spirit, our team at Leadcom has pioneered the creation of the world's first permanent magnet air compressor. With an astounding annual production capacity of 12,000 units, encompassing 15 diverse series and 150 flexible specifications, Leadcom is uniquely positioned to satisfy and exceed the varied demands of numerous industries, fulfilling a spectrum of industrial needs with precision and efficiency.

Leadcom takes pride in its exceptional customer service, poised to deliver swift and efficient solutions at every stage. Our expert team offers insightful pre-sales consultations, guiding customers to the most suitable products tailored to their specific requirements. We provide comprehensive installation support, ensuring a seamless, worry-free setup process. In addition, our prompt and reliable after-sales services include maintenance and repairs designed to minimize downtime, reflecting our relentless dedication to achieving extraordinary customer satisfaction.

Looking ahead, Leadcom is steadfast in its commitment to maintaining the pinnacle of professionalism and innovation. With a strategic vision focused on becoming a leading global force in the manufacturing sector, Leadcom is poised to set new standards and achieve unprecedented success worldwide.

Certifications

FAQ

Q1: Are you a manufacturer or trading company?
A1: We are a prestigious professional air compressor manufacturer proudly based in Guangzhou, China.

Q2: What is your delivery time?
A2: Our streamlined processes enable delivery within a swift 15 days. For urgent orders, please do not hesitate to reach out to our sales team in advance for customized arrangements.

Q3: What are the terms of payment?
A3: We offer flexible payment options including T/T, L/C, Paypal, etc. Additionally, we accept various currencies such as USD, RMB, Euro, and more.

Q4: How long could your air compressor be used?
A4: Our durable air compressors are engineered to serve you efficiently for an impressive span of over 10 years.

Q5: How long is your air compressor warranty?
A5: We offer a comprehensive one-year warranty for the entire machine from the moment it leaves our factory.

Q6: Do your company accept ODM & OEM?
A6: Yes, we enthusiastically undertake full ODM & OEM projects, crafting solutions tailored to your specific requirements.

Q7: How about your after-sales service?
A7: 1. We provide comprehensive online instructions for installation and commissioning to support our valued customers.
2. Our team of highly trained engineers is available for overseas service, ensuring expert assistance wherever you are located.