Industrial Air-Cooled Permanent Magnet Compressor for Maximum Performance

• Customization: Available
• After-sales Service: 7*24
• Warranty: 1 Year
• Model NO.: CA
• Lubrication Style: Lubricated
• Cooling System: Air Cooling
• Power Source: AC Power
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Flow Rate: 1.1m3/Min-12.5m3/Min
• Pressure: 8/10 Bar
• Starting Mode: Pm Motor/Direct-Driven
• Specification: 7.5-75kw
• Trademark: Leadcom
• Origin: China
• HS Code: 841480
• Production Capacity: 20, 000 Pieces/Year
• Package Size: 1004.00cm * 650.00cm * 1085.00cm
• Package Gross Weight: 205.000kg

Product Description

Product Presentation

CA Series Parameter Table
Model	CA7.5	CA11	CA15	CA22	CA37	CA55	CA75
Rate Power	7.5kW	11kW	15kW	22kW	37kW	55kW	75kW
F.A.D	1.1m3/min	1.6m3/min	2.6m3/min	3.6m3/min	6.5m3/min	10.0m3/min	12.5m3/min
Pressure	≤0.8MPa (Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted)
Drive Type	PM Motor/Direct-driven
Voltage/Frequency	AC380V-50Hz
Starting Mode	Variable Frequency
Connection	G1/2''	G1''		G1''	Rp1-1/2''	G2''	G2''
Size(LxWxH)	954X600X1035mm	1100X720X1180mm		1100X720X1180mm	1280X920X1350mm	1580X1160X1600mm	1580X1160X1600mm
Weight	155kg	245kg		285kg	445kg	920kg	990kg

Comparison between permanent magnet motor and ordinary asynchronous motor

Compared with electrically excited motors, permanent magnet motors have the following advantages:
High efficiency
By eliminating the excitation system loss, permanent magnet motors enhance efficiency by 5-12% while boasting a high power factor and a large torque inertia ratio. The reduction of stator current and resistance loss, alongside measurable rotor parameters, ensures superior control performance. These motors feature a direct drive, eliminating speed slip and bearing transmission, thus boosting efficiency by over 3%. With light loads, they are 15-35% more efficient compared to asynchronous motors of the same specification. Remarkably, they maintain high efficiency regardless of load conditions. Hylein's permanent magnet motors align with the top-tier national level 1 energy efficiency standards.
Low noise
With a meticulously crafted magnetic field design and optimized magnetic density distribution, these motors offer a wider operating frequency range and substantially reduced operational noise. They guarantee truly constant air pressure through open-loop vector control, with a remarkable response time of less than 50ms, enabling instant adjustment of gas production across an extensive range.
Compact structure, small size, light weight, high precision and fast response
The elimination of the exciting winding and power supply (magnetic pole core) results in a simplified structure, ensuring reliable operation and easy maintenance.
High starting torque
Permanent magnet synchronous motors exhibit a starting torque and overload capacity that is a full power level higher than three-phase asynchronous motors. The maximum starting torque to rated torque ratio exceeds 3 times, while typical asynchronous motors achieve only up to 1.6 times.

 

 

About Leadcom
Leadcom stands as a distinguished and renowned professional manufacturer, celebrated for its groundbreaking advancements in air compressor and vacuum pump production. Originating from Linghein, the company was proudly acquired by industry leader Atlas Copco. With a venerable history, the original team harnessed their profound expertise to revive Leadcom, infusing the industry with their rich tapestry of experience.

For over 25 years, Leadcom has dominated the industry with formidable research, development, and production capabilities, consistently setting benchmarks that few can match.
Trailblazers in innovation, our adept team at Leadcom was the first to mastermind and produce the permanent magnet air compressor. Our impressive annual production capability reaches 12,000 units, spanning 15 diverse series with 150 meticulously crafted specifications, fulfilling the diverse needs across a wide array of sectors.

Leadcom is supported by a highly professional and dedicated customer service team, ready to deliver rapid and effective solutions. From insightful pre-sales consultations that assist customers in choosing the perfect product tailored to their specific needs, to comprehensive installation guidance for a seamless setup, and prompt and reliable after-sales maintenance, Leadcom's unwavering commitment to customer satisfaction shines through.

 

 

FAQ

Q1: Are you a manufacturer or trading company?
A1: We are a highly regarded professional air compressor manufacturer, proudly situated in Guangzhou, China.

Q2: What is your delivery time?
A2: Our streamlined processes facilitate delivery within a swift 15 days. For urgent orders, please feel free to contact our sales team beforehand for special arrangements.

Q3: What are the terms of payment?
A3: We offer flexible and convenient payment options, including T/T, L/C, Paypal, among others. We also accept various currencies such as USD, RMB, Euro, and more.

Q4: How long could your air compressor be used?
A4: Our robust air compressors are engineered to serve efficiently for an impressive duration exceeding 10 years.

Q5: How long is your air compressor warranty?
A5: We proudly offer a complete one-year warranty covering every component and aspect of the machine, starting from the moment it departs our factory premises.

Q6: Do your company accept ODM & OEM?
A6: Absolutely! We are thrilled to take on comprehensive ODM & OEM projects, engineering and developing bespoke solutions precisely aligned with your unique specifications.

Q7: How about your after-sales service?
A7: 1. We provide thorough and detailed online guidance for installation and commissioning, dedicated to offering unwavering support to our esteemed customers.
2. Our cadre of exceptionally skilled engineers stands ready to deliver overseas service, guaranteeing expert assistance no matter where you are situated.