High-Efficiency Industrial Screw Air Compressor for Optimal Flow

• Customization: Available
• After-sales Service: 7*24
• Warranty: 1 Year
• Model NO.: CA
• Lubrication Style: Lubricated
• Cooling System: Air Cooling
• Power Source: AC Power
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Flow Rate: 1.1m3/Min-12.5m3/Min
• Pressure: 8/10 Bar
• Starting Mode: Pm Motor/Direct-Driven
• Specification: 7.5-75kw
• Trademark: Leadcom
• Origin: China
• HS Code: 841480
• Production Capacity: 20, 000 Pieces/Year
• Package Size: 1004.00cm * 650.00cm * 1085.00cm
• Package Gross Weight: 205.000kg

Product Description

Product Presentation

CA Series Parameter Table
Model	CA7.5	CA11	CA15	CA22	CA37	CA55	CA75
Rate Power	7.5kW	11kW	15kW	22kW	37kW	55kW	75kW
F.A.D	1.1m3/min	1.6m3/min	2.6m3/min	3.6m3/min	6.5m3/min	10.0m3/min	12.5m3/min
Pressure	≤0.8MPa (Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted)
Drive Type	PM Motor/Direct-driven
Voltage/Frequency	AC380V-50Hz
Starting Mode	Variable Frequency
Connection	G1/2''	G1''		G1''	Rp1-1/2''	G2''	G2''
Size(LxWxH)	954X600X1035mm	1100X720X1180mm		1100X720X1180mm	1280X920X1350mm	1580X1160X1600mm	1580X1160X1600mm
Weight	155kg	245kg		285kg	445kg	920kg	990kg

Comparison between Permanent Magnet Motor and Ordinary Asynchronous Motor

Compared with electrically excited motors, permanent magnet motors offer impressive advantages:
High Efficiency
Permanent magnet motors stand out by eliminating excitation system losses, boosting efficiency by an impressive 5-12%. They exhibit a high power factor, superior torque inertia ratio, reduced stator current, and minimized stator resistance loss. Moreover, rotor parameters can be easily measured for outstanding control performance. These motors facilitate direct drive with no speed slip, no bearing or connection transmission issues, enhancing efficiency by over 3%. Compared to same-specification asynchronous motors, light load efficiency can increase by 15-35%. They maintain high efficiency across both light and heavy loads. Currently, Hylein's permanent magnet motors meet national Level 1 energy efficiency standards.
Low Noise
Our permanent magnet motors are designed with an impeccable magnetic field and magnetic density distribution, providing a wider operating frequency range and significantly lower noise levels. Enjoy truly consistent air pressure with open-loop vector control; response times are less than 50ms, allowing for instantaneous gas production adjustments across a broad range.
Compact Structure, Small Size, Light Weight, High Precision, and Fast Response
By eliminating the exciting winding and power supply (magnetic pole core), our motors are designed with simplicity, reliability, and ease of maintenance in mind.
High Starting Torque
Permanent magnet synchronous motors boast starting torque and overload capacity one power level higher than three-phase asynchronous motors. The maximum starting torque to rated torque ratio exceeds 3 times, whereas, for general asynchronous motors, it reaches only 1.6 times.

 

 

About Leadcom
Leadcom is a distinguished and professional manufacturer, renowned for its pioneering advancements in air compressors and vacuum pumps. Originating from Linghein and later acquired by industry giant Atlas Copco, Leadcom continues to thrive. The original team leveraged their extensive expertise to re-launch Leadcom, bringing rich experience to the forefront of the industry.

With a storied legacy of over 25 years, Leadcom has honed formidable research, development, and production capabilities, setting unmatched industry benchmarks.
Trailblazers in innovation, Leadcom's expert team engineered the inaugural permanent magnet air compressor. Our annual production capacity impressively reaches 12,000 units, encompassing 15 diverse series with 150 meticulously designed specifications, ensuring we adeptly cater to diverse sectoral needs.

Leadcom prides itself on its professional and dedicated customer service team, committed to delivering swift, efficient solutions. From insightful pre-sales consultations that guide customers in selecting the perfect product to seamless installation guidance and prompt after-sales maintenance, Leadcom's unwavering dedication to customer satisfaction remains unparalleled.

 

 

FAQ

Q1: Are you a manufacturer or trading company?
A1: We are a prestigious professional air compressor manufacturer proudly headquartered in Guangzhou, China.

Q2: What is your delivery time?
A2: Our streamlined processes ensure delivery within a swift 15 days. For urgent orders, please do not hesitate to contact our sales team for customized arrangements.

Q3: What are the terms of payment?
A3: We offer flexible payment options, including T/T, L/C, Paypal, etc. We accept multiple currencies such as USD, RMB, Euro, and more.

Q4: How long could your air compressor be used?
A4: Our robust air compressors are engineered to provide efficient service for an impressive duration exceeding 10 years.

Q5: How long is your air compressor warranty?
A5: We proudly provide an all-encompassing one-year warranty for the entire machine, starting the moment it departs from our factory. This ensures peace of mind and a commitment to quality for our valued customers.

Q6: Do your company accept ODM & OEM?
A6: Absolutely! We eagerly embrace full ODM & OEM projects, delivering bespoke solutions tailored to meet your unique requirements with precision and excellence.

Q7: How about your after-sales service?
A7: 1. We deliver an extensive suite of online instructions for the installation and commissioning process, ensuring our esteemed customers receive unwavering support.
2. Our cadre of highly skilled engineers is ready for overseas assignments, guaranteeing expert assistance and peace of mind no matter where you are globally.