G2 Industrial Two-Stage VSD Compressor for Optimal Performance

• Customization: Available
• After-sales Service: 7*24
• Warranty: 1 Year
• Model NO.: G2
• Lubrication Style: Lubricated
• Cooling System: Air Cooling
• Power Source: AC Power
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Flow Rate: 5.8-61m3/Min
• Pressure: 8/10bar
• Starting Mode: Variable Frequency
• Specification: 37-315kw
• Trademark: Leadcom
• Origin: China
• HS Code: 8414809090
• Production Capacity: 20, 000 Pieces/Year
• Package Size: 2090.00cm * 1240.00cm * 1560.00cm
• Package Gross Weight: 1050.000kg

Product Description

Product Presentation

G2 Series Parameter Table
Model	Rate Power(kW)	Pressure(MPa)	F.A.D(m3/min)	Size(LxWxH)	Connection(Inch)	Weight(Kg)
G2-37PL	37	0.8	6.8	1950X1100X1390mm	Rp1-1/2''	950
G2-45PL	45	0.8	8.2	1950X1100X1390mm	Rp1-1/2''	980
G2-55PL	55	0.8	11.6	2590X1500X1640mm	DN50	1890
G2-75PL	75	0.8	15.6	2590X1500X1640mm	DN50	1960
G2-90PL	90	0.8	18.5	2990X1700X1963mm	DN65	2200
G2-110PL	110	0.8	21.0	2990X1700X1963mm	DN65	2360
G2-132PL	132	0.8	24.7	2990X1700X1963mm	DN65	2445
G2-160PL	160	0.8	31	3450X1880X2120mm	DN80	4000
G2-185PL	185	0.8	35.5	3450X1880X2120mm	DN80	4050
G2-200PL	200	0.8	40.0	3280X1980X2210mm	DN125	5600
G2-220PL	220	0.8	45.0	3280X1980X2210mm	DN125	5700
G2-250PL	250	0.8	50.0	3280X1980X2210mm	DN125	6000
G2-315PL	315	0.8	61.0	4300X2300X2380mm	DN125	7200

Comparison between Permanent Magnet Motor and Ordinary Asynchronous Motor

Compared with electrically excited motors, permanent magnet motors stand out with remarkable advantages:
High Efficiency
Unleash the full potential of your operations with the unparalleled efficiency of our permanent magnet motors. By eliminating excitation system loss, these motors enhance efficiency by an impressive 5-12%. Experience a high power factor, coupled with a phenomenal torque inertia ratio. The reduced stator current and minimized resistance losses make for an optimal power solution. With rotor parameters that are measurable and precise, control performance reaches new heights. Enjoy motor direct drive without the hassle of speed slip, bearings, or connection transmission - exceeding efficiency gains of 3%. When operating under light loads, witness a leap of 15-35% in efficiency compared to standard asynchronous motors, ensuring top-tier performance under any condition. Hylein's permanent magnet motors proudly meet national level 1 energy efficiency standards, setting a benchmark in energy conservation.
Low Noise
Delight in the serenity of precision-engineered performance with our permanent magnet motors, meticulously crafted for a whisper-quiet operation. The strategic magnetic field design and optimized magnetic density distribution afford a broad operating frequency range, drastically reducing operational noise. With open-loop vector control, relish in truly consistent air pressure boasting a swift response time of less than 50ms, enabling instantaneous adjustments to gas production across a wide spectrum.
Compact Structure, Small Size, Light Weight, High Precision and Fast Response
Innovative design frees our motors from the constraints of traditional exciting windings and power supplies (magnetic pole cores), streamlining the structure for unmatched reliability and effortless maintenance.
High Starting Torque
Experience a power surge with our permanent magnet synchronous motors, boasting starting torque and overload capabilities far surpassing traditional three-phase asynchronous motors. Achieve a maximum starting torque to rated torque ratio exceeding 3 times, in stark contrast to the mere 1.6 times of conventional asynchronous motors.

Two-stage Compression

Energy Efficient Save A Lot

In a bid for maximum efficiency, enterprises often reserve up to 20% of an air compressor's displacement when selecting their type, factoring in pressure loss and common selection practices.
The dynamic nature of air consumption, which varies considerably across different times of the year, month, and even day, results in air compressors often operating at merely 50-70% of the rated air displacement, leading to significant energy waste.
Amidst rising material costs, the pivotal challenge is reducing expenses, with electricity bills becoming primary cost drivers, overshadowing material expenditures. Cutting down on electricity usage translates to cutting down costs, enhancing product competitiveness in the market!
Conclusion: When juxtaposed against ordinary power frequency and frequency conversion air compressors, the permanent magnet frequency conversion air compressor emerges as the champion of energy efficiency. It boasts significantly lower energy consumption and superior energy savings.Marvel at the transformation!

Air-end Operates Almost Silent

 

 

Company Profile

Leadcom stands as a paragon of excellence in the realm of air compressors and vacuum pumps. With origins deeply rooted in Linghein and bolstered by a strategic acquisition by Atlas Copco, the rejuvenated Leadcom is now thriving with a wealth of expert knowledge and pioneering spirit from its original team.

With a legacy of 25 years in manufacturing brilliance, Leadcom embodies exceptional R&D capabilities and unmatched production expertise, making it a leader in its field.
Our trailblazing team at Leadcom proudly engineered the first-ever permanent magnet air compressor. We command an extraordinary annual production rate of 12,000 units, covering an impressive range of 15 series and 150 specific models. This robust capacity ensures we meet the multifaceted demands of industries worldwide.

Leadcom's dedicated customer service team epitomizes professionalism and commitment, always poised to provide prompt and effective solutions. From insightful pre-sales consultations that meticulously guide customers to the perfect product choice, to comprehensive installation instructions for flawless setup, and efficient after-sales support that ensures minimal operational disruption, Leadcom is unwavering in its quest for unparalleled customer satisfaction.

Looking to the future, Leadcom is committed to upholding the highest standards of professionalism and embracing cutting-edge innovation, with an ambitious vision to rise as a global leader in its industry.

Certifications

FAQ

Q1: Are you a manufacturer or trading company?
A1: We are a prestigious professional air compressor manufacturer proudly based in Guangzhou, China.

Q2: What is your delivery time?
A2: Our streamlined processes enable delivery within a swift 15 days. For urgent orders, please do not hesitate to reach out to our sales team in advance for customized arrangements.

Q3: What are the terms of payment?
A3: We offer flexible payment options including T/T, L/C, Paypal, etc. Additionally, we accept various currencies such as USD, RMB, Euro, and more.

Q4: How long could your air compressor be used?
A4: Our durable air compressors are engineered to serve you efficiently for an impressive span of over 10 years.

Q5: How long is your air compressor warranty?
A5: We offer a comprehensive one-year warranty for the entire machine from the moment it leaves our factory.

Q6: Do your company accept ODM & OEM?
A6: Yes, we enthusiastically undertake full ODM & OEM projects, crafting solutions tailored to your specific requirements.

Q7: How about your after-sales service?
A7: 1. We provide comprehensive online instructions for installation and commissioning to support our valued customers.
2. Our team of highly trained engineers is available for overseas service, ensuring expert assistance wherever you are located.