Energy Efficient Permanent Magnet Variable Speed Air Compressor 8/10bar

• Customization: Available
• After-sales Service: 7*24
• Warranty: 1 Year
• Model NO.: CA
• Lubrication Style: Lubricated
• Cooling System: Air Cooling
• Power Source: AC Power
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Flow Rate: 1.1~12.5m3/Min
• Pressure: 8/10bar
• Starting Mode: Variable Frequency
• Specification: 7.5kw 11kw 15kw 22kw 37kw 55kw 75Kw
• Trademark: Leadcom
• Origin: China
• HS Code: 8414809090
• Production Capacity: 20, 000 Pieces/Year
• Package Size: 1100.00cm * 720.00cm * 1180.00cm
• Package Gross Weight: 300.000kg

Product Description

Product Presentation

CA Series Parameter Table
Model	CA7.5	CA11	CA15	CA22	CA37	CA55	CA75
Rate Power	7.5kW	11kW	15kW	22kW	37kW	55kW	75kW
F.A.D	1.1m3/min	1.6m3/min	2.6m3/min	3.6m3/min	6.5m3/min	10.0m3/min	12.5m3/min
Pressure	≤0.8MPa (Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted)
Drive Type	PM Motor/Direct-driven
Voltage/Frequency	AC380V-50Hz
Starting Mode	Variable Frequency
Connection	G1/2''	G1''		G1''	Rp1-1/2''	G2''	G2''
Size(LxWxH)	954X600X1035mm	1100X720X1180mm		1100X720X1180mm	1280X920X1350mm	1580X1160X1600mm	1580X1160X1600mm
Weight	155kg	245kg		285kg	445kg	920kg	990kg

Comparison between permanent magnet motor and ordinary asynchronous motor

Compared with electrically excited motors, permanent magnet motors boast several distinct advantages:
High Efficiency
By eliminating excitation system loss, these motors enhance efficiency by 5-12%. They offer a high power factor and a superior torque inertia ratio, resulting in reduced stator current and stator resistance loss. With the ability to measure rotor parameters, they deliver exceptional control performance. The motor's direct drive design ensures no speed slip, and eliminates the need for bearings and connection transmission, boosting efficiency by over 3%. Compared to asynchronous motors of the same specification, the efficiency is 15-35% higher under light load conditions, ensuring optimal performance at both light and heavy loads. Currently, the energy efficiency of permanent magnet motors used by Hylein has achieved national level 1 energy efficiency standards, setting a benchmark in the industry.
Low Noise
Thanks to a strategic magnetic field design and optimal magnetic density distribution, these motors operate across a wider frequency range with remarkably lower noise levels. The open loop vector control allows for a response time of less than 50ms, enabling instant adjustments in gas production over a wide range, thus maintaining truly constant air pressure.
Compact Structure, Small Size, and Light Weight, with High Precision and Fast Response
The elimination of exciting winding and power supply (magnetic pole core) simplifies the design, enhancing reliability and easing maintenance.
High Starting Torque
The starting torque and overload capacity of permanent magnet synchronous motors outclass those of three-phase asynchronous motors by an entire power level. The ratio of maximum starting torque to rated torque can exceed 3 times, whereas general asynchronous motors typically achieve 1.6 times.

 

 

Company Profile

Leadcom stands as a professional manufacturer specializing in air compressors and vacuum pumps. Originating from Linghein, the company was later acquired by Atlas Copco. The experienced founding team has since reestablished Leadcom, drawing on their wealth of expertise to drive the company's success.

With 25 years of rich manufacturing expertise, Leadcom boasts formidable research, development, and production capabilities.
Pioneers in the field, our team developed and produced the first permanent magnet air compressor. With an annual output capacity of 12,000 sets, spanning 15 series and 150 specifications, we effectively meet the diverse needs of customers across a wide range of industries.

Leadcom prides itself on a professional and dedicated customer service team, always ready to deliver prompt and effective solutions. From pre-sales consultations that help customers select the ideal products for their specific requirements, to meticulous installation guidance ensuring smooth setups, and efficient after-sales maintenance and repair services minimizing downtime, Leadcom is committed to ensuring customer satisfaction.

Looking ahead, Leadcom will continue to embrace professionalism and innovation, striving to become a global leader in the industry.

Certifications

FAQ

Q1: Are you a manufacturer or trading company?
A1: We are a prestigious professional air compressor manufacturer proudly based in Guangzhou, China.

Q2: What is your delivery time?
A2: Our streamlined processes enable delivery within a swift 15 days. For urgent orders, please do not hesitate to reach out to our sales team in advance for customized arrangements.

Q3: What are the terms of payment?
A3: We offer flexible payment options including T/T, L/C, Paypal, etc. Additionally, we accept various currencies such as USD, RMB, Euro, and more.

Q4: How long could your air compressor be used?
A4: Our durable air compressors are engineered to serve you efficiently for an impressive span of over 10 years.

Q5: How long is your air compressor warranty?
A5: We offer a comprehensive one-year warranty for the entire machine from the moment it leaves our factory.

Q6: Do your company accept ODM & OEM?
A6: Yes, we enthusiastically undertake full ODM & OEM projects, crafting solutions tailored to your specific requirements.

Q7: How about your after-sales service?
A7: 1. We provide comprehensive online instructions for installation and commissioning to support our valued customers.
2. Our team of highly trained engineers is available for overseas service, ensuring expert assistance wherever you are located.