Advanced Permanent Magnet Air Compressor with 8 Bar Pressure

• Customization: Available
• After-sales Service: 7*24
• Warranty: 1 Year
• Model NO.: CA
• Lubrication Style: Lubricated
• Cooling System: Air Cooling
• Power Source: AC Power
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Flow Rate: 1.1m3/Min-12.5m3/Min
• Pressure: 8/10 Bar
• Starting Mode: Pm Motor/Direct-Driven
• Specification: 7.5-75kw
• Trademark: Leadcom
• Origin: China
• HS Code: 841480
• Production Capacity: 20, 000 Pieces/Year
• Package Size: 1004.00cm * 650.00cm * 1085.00cm
• Package Gross Weight: 205.000kg

Product Description

Product Presentation

CA Series Parameter Table
Model	CA7.5	CA11	CA15	CA22	CA37	CA55	CA75
Rate Power	7.5kW	11kW	15kW	22kW	37kW	55kW	75kW
F.A.D	1.1m3/min	1.6m3/min	2.6m3/min	3.6m3/min	6.5m3/min	10.0m3/min	12.5m3/min
Pressure	≤0.8MPa (Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted)
Drive Type	PM Motor/Direct-driven
Voltage/Frequency	AC380V-50Hz
Starting Mode	Variable Frequency
Connection	G1/2''	G1''		G1''	Rp1-1/2''	G2''	G2''
Size(LxWxH)	954X600X1035mm	1100X720X1180mm		1100X720X1180mm	1280X920X1350mm	1580X1160X1600mm	1580X1160X1600mm
Weight	155kg	245kg		285kg	445kg	920kg	990kg

Comparison between Permanent Magnet Motor and Ordinary Asynchronous Motor

Compared with electrically excited motors, permanent magnet motors have the following advantages:
High Efficiency
Our cutting-edge permanent magnet motors eliminate excitation system loss, significantly boosting efficiency by 5-12%. They boast a high power factor and a robust torque inertia ratio, resulting in reduced stator current and stator resistance loss. The ability to measure rotor parameters ensures excellent control performance. With direct motor drive, you experience no speed slip, bearing, or connection transmission issues, enhancing efficiency by over 3%. In light load scenarios, these motors outperform asynchronous motors of similar specifications by 15-35% in efficiency, delivering consistent excellence under any load. Presently, Hylein's permanent magnet motors achieve the esteemed national level 1 energy efficiency standards.
Low Noise
Through expert magnetic field design and optimal magnetic density distribution, these motors operate across a wider frequency range with significantly reduced noise. Experience truly constant air pressure with open-loop vector control, boasting a response time of less than 50ms, allowing instant gas production adjustments over a broad spectrum.
Compact, Lightweight Structure with Precision and Fast Response
By eliminating the exciting winding and power supply (magnetic pole core), these motors feature a simplified design that enhances operational reliability and eases maintenance.
High Starting Torque
Permanent magnet synchronous motors offer a starting torque and overload capacity that surpasses three-phase asynchronous motors by one power level. The ratio of maximum starting to rated torque exceeds 3 times, compared to just 1.6 times in standard asynchronous motors.

 

 

About Leadcom
Leadcom stands as a visionary and expert manufacturer, acclaimed for its groundbreaking progress in the air compressor and vacuum pump sectors. Originating from Linghein, this trailblazing enterprise was later integrated into the illustrious Atlas Copco family. Harnessing a wealth of experience, the original team re-envisioned Leadcom, infusing the industry with its rich expertise and innovative spirit.

With a distinguished legacy exceeding 25 years, Leadcom excels in research, development, and manufacturing, setting unparalleled standards within the industry.
Leadcom's pioneering team crafted the world's first permanent magnet air compressor. Our impressive production capacity spans 12,000 units annually, across 15 unique series and 150 meticulously crafted specifications, ensuring versatility to meet a myriad of industry demands.

Leadcom's customer service is second to none, featuring a highly professional and devoted team ready to provide rapid and effective solutions. From insightful pre-sales consultations to seamless installation guidance and prompt after-sales support, Leadcom is dedicated to ensuring customer satisfaction at every stage.

 

 

FAQ

Q1: Are you a manufacturer or trading company?
A1: We proudly stand as a revered professional air compressor manufacturer, headquartered in Guangzhou, China.

Q2: What is your delivery time?
A2: Our efficient processes promise delivery within just 15 days. For urgent requirements, please contact our sales team to discuss bespoke arrangements.

Q3: What are the terms of payment?
A3: We provide adaptable payment methods including T/T, L/C, Paypal, among others, and accept various currencies such as USD, RMB, Euro, etc.

Q4: How long could your air compressor be used?
A4: Our robust air compressors are designed to deliver exceptional performance for over a decade.

Q5: How long is your air compressor warranty?
A5: We proudly extend an all-encompassing one-year warranty on the entire machine, commencing from the moment it departs our manufacturing hub. This assurance underscores our commitment to quality and reliability.

Q6: Do your company accept ODM & OEM?
A6: Yes, we are thrilled to embrace comprehensive ODM & OEM projects, expertly crafting bespoke solutions that are meticulously aligned with your unique needs.

Q7: How about your after-sales service?
A7: 1. We offer extensive online guidance for both installation and commissioning, ensuring our esteemed customers receive robust support every step of the way.
2. Our elite team of seasoned engineers stands ready for overseas deployment, delivering exceptional service and expertise no matter where you are in the world.