Product Presentation
| CA Series Parameter Table |
| Model |
CA7.5 |
CA11 |
CA15 |
CA22 |
CA37 |
CA55 |
CA75 |
| Rate Power |
7.5kW |
11kW |
15kW |
22kW |
37kW |
55kW |
75kW |
| F.A.D |
1.1m3/min |
1.6m3/min |
2.6m3/min |
3.6m3/min |
6.5m3/min |
10.0m3/min |
12.5m3/min |
| Pressure |
≤0.8MPa
(Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted) |
| Drive Type |
PM Motor/Direct-driven |
| Voltage/Frequency |
AC380V-50Hz |
| Starting Mode |
Variable Frequency |
| Connection |
G1/2'' |
G1'' |
G1'' |
Rp1-1/2'' |
G2'' |
G2'' |
| Size(LxWxH) |
954X600X1035mm |
1100X720X1180mm |
1100X720X1180mm |
1280X920X1350mm |
1580X1160X1600mm |
1580X1160X1600mm |
| Weight |
155kg |
245kg |
285kg |
445kg |
920kg |
990kg |
Comparison between Permanent Magnet Motors and Ordinary Asynchronous Motors
In the realm of innovation, permanent magnet motors outshine electrically excited motors through a suite of remarkable advantages:
1. Elevated Efficiency
Embrace a new era of efficiency with permanent magnet motors that eliminate excitation system loss, enhancing efficiency by an impressive 5-12%. They boast a high power factor and a superior torque inertia ratio. The reduction in stator current and resistance loss, coupled with measurable rotor parameters, ensures exceptional control performance. With direct motor drive and zero speed slip, efficiency sees a notable increase of over 3%. Light loads witness an awe-inspiring 15-35% efficiency enhancement compared to their asynchronous counterparts. Achieve consistent efficiency regardless of load levels. With Hylein's permanent magnet motors achieving the esteemed national level 1 energy efficiency standards, these motors are truly a hallmark of energy-saving brilliance.
2. Minimized Noise
Witness the art of silence with ingeniously designed magnetic fields and optimal magnetic density distribution. Enjoy a wider operating frequency range with significantly reduced noise levels. Experience unyielding air pressure constancy through open-loop vector control, boasting a minimal response time of <50ms, allowing rapid adjustments in gas production across an extensive range.
3. Compact and Lightweight Yet Exceptionally Precise
Experience simplicity and reliability with a design devoid of exciting windings and power supply (magnetic pole core). This streamlined structure ensures not only robust operation but also effortless maintenance.
4. Exceptional Starting Torque
Delight in the formidable power of permanent magnet synchronous motors, offering starting torque and overload capacity that surpass three-phase asynchronous motors by one power level. The capability of the maximum starting torque ratio to rated torque reaches new heights, exceeding 3 times, a stark contrast to the modest 1.6 times of traditional asynchronous motors.
About Leadcom
Leadcom stands as a beacon of innovation and excellence in manufacturing, renowned for its avant-garde air compressors and vacuum pumps. Originating from Linghein and now a proud part of industry leader Atlas Copco, Leadcom re-emerges with a wealth of knowledge, setting new standards with its exceptional team.
With an impressive legacy spanning over 25 years, Leadcom has carved a niche with unparalleled research, development, and production capabilities, setting industry standards that others aspire to achieve.
At the forefront of technological advancement, Leadcom's expert team crafted the world's first permanent magnet air compressor. Our annual production capacity is a remarkable 12,000 units, featuring 15 distinct series and 150 meticulously crafted specifications, tailored to meet a variety of sectoral needs.
Leadcom is supported by a devoted customer service team, ready to provide efficient and timely solutions. From insightful pre-sales consultations to meticulous installation assistance and prompt after-sales support, Leadcom's commitment to customer satisfaction is unwavering and complete.
FAQ
Q1: Are you a manufacturer or trading company?
A1: We take pride in being a distinguished air compressor manufacturer headquartered in Guangzhou, China.
Q2: What is your delivery time?
A2: Our efficient processes enable us to deliver within a swift 15-day window. For expedited needs, contact our sales team ahead of time for tailored arrangements.
Q3: What are the terms of payment?
A3: We accommodate flexible payment methods, including T/T, L/C, and Paypal, accepting various currencies such as USD, RMB, Euro, and more.
Q4: How long could your air compressor be used?
A4: Our robust air compressors are designed for a long-lasting service life, reliably serving you for over a decade.
Q5: How long is your air compressor warranty?
A5: We proudly provide an all-encompassing one-year warranty on the entire machine, starting from the moment it departs our manufacturing facility. This assurance guarantees peace of mind and protection for your investment.
Q6: Does your company accept ODM & OEM projects?
A6: Absolutely! We eagerly embrace comprehensive ODM & OEM projects, expertly crafting bespoke solutions that perfectly align with your unique needs and specifications.
Q7: What can you tell us about your after-sales service?
A7: 1. We offer extensive online guidance for installation and commissioning, providing invaluable support to our esteemed customers at every stage of their experience.
2. Our dedicated team of highly skilled engineers is ready to travel, offering their expertise and assistance worldwide to ensure seamless support wherever you may be.
Audited Supplier 
){kind=link}