High-Efficiency 10 Bar Permanent Magnet Air Compressor Unit

• Customization: Available
• After-sales Service: 7*24
• Warranty: 1 Year
• Model NO.: CA
• Lubrication Style: Lubricated
• Cooling System: Air Cooling
• Power Source: AC Power
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Flow Rate: 1.1m3/Min-12.5m3/Min
• Pressure: 8/10 Bar
• Starting Mode: Pm Motor/Direct-Driven
• Specification: 7.5-75kw
• Trademark: Leadcom
• Origin: China
• HS Code: 841480
• Production Capacity: 20, 000 Pieces/Year
• Package Size: 1004.00cm * 650.00cm * 1085.00cm
• Package Gross Weight: 205.000kg

Product Description

Product Presentation

CA Series Parameter Table
Model	CA7.5	CA11	CA15	CA22	CA37	CA55	CA75
Rate Power	7.5kW	11kW	15kW	22kW	37kW	55kW	75kW
F.A.D	1.1m3/min	1.6m3/min	2.6m3/min	3.6m3/min	6.5m3/min	10.0m3/min	12.5m3/min
Pressure	≤0.8MPa (Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted)
Drive Type	PM Motor/Direct-driven
Voltage/Frequency	AC380V-50Hz
Starting Mode	Variable Frequency
Connection	G1/2''	G1''		G1''	Rp1-1/2''	G2''	G2''
Size(LxWxH)	954X600X1035mm	1100X720X1180mm		1100X720X1180mm	1280X920X1350mm	1580X1160X1600mm	1580X1160X1600mm
Weight	155kg	245kg		285kg	445kg	920kg	990kg

Comparison between permanent magnet motor and ordinary asynchronous motor

Compared with electrically excited motors, permanent magnet motors have the following advantages:
High efficiency
By ingeniously eliminating the excitation system losses, permanent magnet motors significantly enhance efficiency by 5-12%. They boast a high power factor and a remarkable torque inertia ratio. With reduced stator current and resistance loss, and measurable rotor parameters, these motors promise excellent control performance. Direct motor drive eliminates speed slip, bearings, and connection transmission, boosting efficiency by 3% or more. Astonishingly, in light load scenarios, efficiency increases by an impressive 15-35% over asynchronous motors. Whether under light or heavy load, the efficiency remains consistently high. Notably, the permanent magnet motors employed by Hylein achieve national Level 1 energy efficiency standards.
Low noise
Thanks to a meticulously crafted magnetic field design and optimal magnetic density distribution, the motors operate within a wider frequency range, minimizing operational noise. Experience truly constant air pressure through cutting-edge open-loop vector control, with a rapid response time of less than 50ms, capable of adjusting gas production instantly across a broad spectrum.
Compact structure, small size, light weight, high precision and fast response
The design revolutionizes simplicity by eliminating the exciting winding and power supply (magnetic pole core), ensuring reliability and ease of maintenance.
High starting torque
With starting torque and overload capacity one power level higher than three-phase asynchronous motors, the permanent magnet synchronous motors excel. Their maximum starting torque to rated torque ratio can reach beyond 3 times, outperforming general asynchronous motors, which achieve only 1.6 times.

 

 

About Leadcom
Leadcom stands tall as a beacon of excellence and professionalism in the realm of air compressor and vacuum pump manufacturing. Originating from the innovative hub of Linghein, Leadcom was acquired by the formidable Atlas Copco. This acquisition only strengthened the original team's resolve, leveraging their profound knowledge to re-establish Leadcom as a leader in the industry, offering a rich tapestry of experience and innovation.

With a prestigious legacy spanning over 25 years, Leadcom exemplifies formidable prowess in research, development, and production, setting unparalleled industry standards.
At the forefront of innovation, Leadcom's expert team ingeniously pioneered the first permanent magnet air compressor. Our impressive annual production capacity reaches 12,000 units, encompassing 15 diverse series with 150 exceptional specifications, ensuring an adept response to the varied demands across multiple sectors.

Leadcom is supported by an exceptionally professional and dedicated customer service team, poised to deliver swift, efficient solutions. From insightful pre-sales consultations to comprehensive installation guidance and prompt after-sales maintenance, Leadcom's commitment to customer satisfaction is unwavering, ensuring every customer's experience is seamless and rewarding.

 

 

FAQ

Q1: Are you a manufacturer or trading company?
A1: We are a distinguished professional air compressor manufacturer proudly rooted in Guangzhou, China.

Q2: What is your delivery time?
A2: Our streamlined processes ensure delivery within a swift 15 days. For urgent orders, please engage with our sales team for tailored arrangements.

Q3: What are the terms of payment?
A3: We offer an array of flexible payment options, including T/T, L/C, Paypal, and more. Additionally, we accommodate various currencies such as USD, RMB, Euro, among others.

Q4: How long could your air compressor be used?
A4: Our robust air compressors are engineered for longevity, delivering reliable service for over 10 years.

Q5: How long is your air compressor warranty?
A5: We proudly extend a full one-year warranty for the entire machine, commencing the moment it exits our factory, ensuring peace of mind and durable performance.

Q6: Do your company accept ODM & OEM?
A6: Absolutely! We embrace the opportunity to undertake full ODM & OEM projects, skillfully crafting solutions that are meticulously tailored to meet your unique needs and specifications.

Q7: How about your after-sales service?
A7: 1. We offer comprehensive online instructions to guide you through every step of installation and commissioning, empowering our cherished customers with seamless implementation.
2. Our elite team of highly trained engineers is ready to deliver expert overseas service, ensuring that exceptional support is available to you, no matter your global location.