Leadcom Permanent Magnet Direct-Driven Air Compressor Ca Model

• Customization: Available
• After-sales Service: 7*24
• Warranty: 1 Year
• Model NO.: CA
• Lubrication Style: Lubricated
• Cooling System: Air Cooling
• Power Source: AC Power
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Flow Rate: 1.1m3/Min-12.5m3/Min
• Pressure: 8/10 Bar
• Starting Mode: Pm Motor/Direct-Driven
• Specification: 7.5-75kw
• Trademark: Leadcom
• Origin: China
• HS Code: 841480
• Production Capacity: 20, 000 Pieces/Year
• Package Size: 1004.00cm * 650.00cm * 1085.00cm
• Package Gross Weight: 205.000kg

Product Description

Product Presentation

CA Series Parameter Table
Model	CA7.5	CA11	CA15	CA22	CA37	CA55	CA75
Rate Power	7.5kW	11kW	15kW	22kW	37kW	55kW	75kW
F.A.D	1.1m3/min	1.6m3/min	2.6m3/min	3.6m3/min	6.5m3/min	10.0m3/min	12.5m3/min
Pressure	≤0.8MPa (Please contact if there is any other pressure requirement,Under different pressure, the exhaust volume can be adjusted)
Drive Type	PM Motor/Direct-driven
Voltage/Frequency	AC380V-50Hz
Starting Mode	Variable Frequency
Connection	G1/2''	G1''		G1''	Rp1-1/2''	G2''	G2''
Size(LxWxH)	954X600X1035mm	1100X720X1180mm		1100X720X1180mm	1280X920X1350mm	1580X1160X1600mm	1580X1160X1600mm
Weight	155kg	245kg		285kg	445kg	920kg	990kg

Delve into the distinct advantages and comparisons of the permanent magnet motor versus the traditional ordinary asynchronous motor.

Explore the key benefits that permanent magnet motors offer over electrically excited motors, revealing a modern engineering marvel:
Unmatched High Efficiency
Eliminate any excitation system loss to improve efficiency by an impressive 5-12%. Benefit from a high power factor with a large torque inertia ratio, while reducing both stator current and stator resistance loss. With rotor parameters measurable and superior control performance, experience motor direct drive without speed slip or bearing and connection transmission. This results in more than a 3% efficiency increase. Witness efficiency increase by 15-35% under light load compared to ordinary motors of the same specification. Delivering consistent efficiency whether under light or heavy loads, our permanent magnet motors meet and exceed the national level 1 energy efficiency standards set by Hylein.
Superbly Low Noise
Experience serenity with a design that embodies reasonable magnetic field architecture, optimized magnetic density distribution, and a wider operating frequency range, culminating in significantly lower operating noise. Achieve truly constant air pressure with open loop vector control, boasting a response time of less than 50ms, allowing for instant, wide-range gas production adjustments.
Ingenious Compact Design
With the elimination of the exciting winding and power supply, enjoy a simple yet robust structure that boasts reliable operation and effortless maintenance, encapsulating precision and quick responsiveness.
Supreme High Starting Torque
Our permanent magnet synchronous motors offer a starting torque and overload capacity that is a power level superior to three-phase asynchronous motors. Boasting a maximum starting torque to rated torque ratio exceeding three times, while the ordinary asynchronous motors offer only 1.6 times.

 

 

About Leadcom
Leadcom stands as a beacon of distinction and professionalism in manufacturing, heralded for its pioneering strides in air compressor and vacuum pump production. From the vibrant city of Linghein, this trailblazing company was gracefully acquired by the industry leader, Atlas Copco, yet retained its original, adept team. With a legacy rich in expertise and innovation, Leadcom was relaunched to embody a heritage of excellence within the industry.

Building upon a venerable history spanning over 25 years, Leadcom sets unparalleled standards in research, development, and production, consistently delivering industry-defining advancements.
As a vanguard of innovation, Leadcom's expert team crafted the pioneering permanent magnet air compressor. With an astonishing annual production capacity reaching 12,000 units and encompassing 15 varied series featuring 150 exceptional, finely tuned specifications, Leadcom remains poised to meet the multifaceted demands across diverse sectors with precision.

Leadcom boasts a highly professional and committed customer service team dedicated to providing rapid and efficient solutions. From insightful pre-sales consultations that empower customers to select products perfectly tailored to their specific requirements, through to comprehensive installation guidance for an effortless setup, and timely, effective after-sales maintenance, Leadcom's unwavering commitment to customer satisfaction is unwavering.

 

 

Frequently Asked Questions (FAQ)

Q1: Are you a manufacturer or trading company?
A1: We pride ourselves as a distinguished manufacturer of professional-grade air compressors, proudly operating from our base in Guangzhou, China.

Q2: What is your delivery time?
A2: Thanks to our efficient processes, deliveries are completed within a swift 15-day timeframe. For urgent requirements, feel free to reach out to our sales team in advance to arrange tailored solutions.

Q3: What are the terms of payment?
A3: We offer a range of flexible payment options including T/T, L/C, Paypal, and more, accepting payments in various currencies such as USD, RMB, Euro, etc., for your convenience.

Q4: How long could your air compressor be used?
A4: Built with durability in mind, our air compressors are designed to provide efficient service for an impressive lifespan of over 10 years.

Q5: How long is your air compressor warranty?
A5: We offer a comprehensive one-year warranty covering every aspect of the machine from the moment it departs our factory premises, ensuring peace of mind and unwavering reliability.

Q6: Do your company accept ODM & OEM?
A6: Yes, we enthusiastically undertake full ODM & OEM projects, crafting bespoke solutions meticulously tailored to meet your specific requirements and preferences.

Q7: How about your after-sales service?
A7: 1. We provide a full suite of comprehensive online instructions for seamless installation and commissioning, designed to give unwavering support to our valued customers.
2. Our team of highly trained and skilled engineers is readily available for overseas service, delivering expert assistance and unparalleled support no matter where you are located.